Wireless Video Transmission Systems

R1000: Equipped with 1 transmitter and 1 receiver;

R2020: Equipped with 1 receiver alone (RX can not be used alone, it must be used with TX!!! the series supports up to 1 transmitter and 4 receivers)

R1010: Equipped with 1 transmitter and 2 receivers;

R1030: Equipped with 1 transmitter and 3 receivers;

R1040: Equipped with 1 transmitter and 4 receivers;

R800: Equipped 1 transmitter (TX can be used alone ,using TUTUplay as a receiver, up to 4 APP Monitor TuTuPlay connections)

Transmission distance

Transmitter and receiver are external 5DB gain antenna, in the case of a transmitter and a receiver can achieve 200 meters of wireless transmission distance, in the case of a transmitter and two receivers can achieve 130 meters of wireless transmission distance, in the case of a transmitter and three receivers as well as a transmitter and four receivers can achieve 100 meters of wireless transmission distance. Distance: The distance between the transmitter and receiver.

Clarity and TuTuPlay

Through Lemorele self-developed H.264 codec technology, in the case of one transmitter and multiple receivers can achieve 1080P60HZ refresh rate, which is very clear for the 200-inch display device. Wi-Fi adaptive frequency hopping through Realtek high performance module, even in large venues or conferences. Provide Android and iOS version of APP Monitor TuTuPlay, which can be monitored on cell phones or tablets.

Plug and Play

No need for complicated wiring and computer configuration, just plug the transmitter into the HDMI port of your computer or other source device, connect the receiver to the HDMI input port of your TV, projector, monitor or whiteboard, and wait for 5-10 seconds for successful projection. No other operation is required (RX purchased separately needs to be paired manually).

Power supply (very important)

To ensure optimal performance, always use a 5V2A power supply to ensure optimal performance of the Wi-Fi module. What happens if the power supply is insufficient? For example, screen casting is unsuccessful, connection lags, sudden disconnection, display interface does not show SSD and password, etc. These are all caused by insufficient power.

Packing list:

Only TX or RX:

R1000-TX and RXR1010-TX and 2*RXR1030-TX and 3*RX

R1040-TX and 4*RX